Skip to main content

LG iPECS - IP Connection

These instructions help you configure your LG iPECS phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Enterprise application:

LG iPECS.TDT
LG.TDS

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

The SMDR output in LG iPECS is disabled by default. To enable the output, you need to amend the following settings in the programming sections below:

SMDR Attributes (PGM 177)​

smdr attributes

Here is an example of a populated SMDR Attributes screen:

populated smdr attributes

Printer Port Selection (PGM 175)​

In the Printer Port Selection (PGM 175) window, set Info/On-line SMDR to Telnet 1 to send call logging data to TIM Enterprise over TCP to port 23.

ISDN Attributes (PGM 200)​

To enable CLI information in the call records produced by your LG iPECS, you need to set the CLI Print To Serial to ON, as shown below:

isdn attributes

Configure TIM Enterprise​

Follow the steps below to configure TIM Enterprise to connect to your LG iPECS:

  1. Click on the Directory tab.

  2. If you don't have a PBX object, press New object and select PBX. Name your site and then select Add. Locate the PBX object you want to configure in the Directory, click on it and select Properties.

  3. A new window will open, displaying the general properties of your PBX object. Select LG iPECS from the Data format list and tick the Keep a local backup of data box, as shown below:

    TIM Enterprise PBX General Properties

  4. Click on the Connection tab and select Establish TCP connection to PBX from the Connection method list.

  5. In the Host field, enter the IP address of your telephone system.

  6. In the Port field, enter 23.

  7. Leave the Username and Password fields blank.

  8. In the IP script field, select Generic Simple from the drop-down list.

    TIM Enterprise PBX Connection Properties

  9. Click on the Save button to apply the settings.