Skip to main content

Unify - Siemens - Realitis-HiPath DX - IP Connection

These instructions help you configure your Unify - Siemens - Realitis-HiPath DX phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Enterprise application:

Siemens HiPath DX.TDT
Siemens HiPath DX.TDS

Contents​

Configure the CIL output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

CIL access over Ethernet​

info

In addition to CIL access over V.24 ports, all Realitis DX and iSDX systems with firmware revision 6.0 and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three such connections; subsequent connection requests are rejected.

To set up and activate this feature, a request must be made to Product Management at Siemens, Beeston.

Connecting to the CIL server​

TIM Enterprise establishes a TCP connection to the IP address of the System/UPI card of your Siemens phone system.

You can choose the IP address of the System/UPI card by setting the variable IPACT in the permanent database. Your local maintenance engineer should be able to program this address for you.

The default listening port is 17257.

Configure The TIM Enterprise​

Follow the steps below to configure TIM Enterprise to connect to your Siemens HiPath DX:

  1. Click on the Directory tab.

  2. If you don't have a PBX object, press New object and select PBX. Name your site and then select Add. Locate the PBX object you want to configure in the Directory, click on it and select Properties.

  3. A new window will open, displaying the general properties of your PBX object. Select Siemens HiPath DX from the Data format list and tick the Keep a local backup of data box, as shown below:

    TIM Enterprise PBX General Properties

  4. Click on the Connection tab and select Establish TCP connection to PBX from the Connection method list.

  5. In the Host field, enter the IP address of your telephone system.

  6. In the Port field, enter 17257.

  7. Leave the Username and Password fields blank.

  8. In the IP script field, select Siemens Realitis DX from the drop-down list.

    TIM Enterprise PBX Connection Properties

  9. Click on the Save button to apply the settings.